Putting Your Water Computer Out Of Operation - Gardena FlexControl 1883 Manual De Instrucciones

1883-20.960.02_12.11.2013_GARDENA.QXP 12.11.2013 08:03 Seite 111
Deactivate
watering program :

6. Putting your Water Computer out of Operation

Storage /
Overwintering :
The adjusted manual watering duration is saved and is
independent from the watering duration in the program,
i.e. the adjusted watering duration is preset for each future
manual valve opening.
The watering program is not executed when the knob is set to
Off. The program remain stored. A program-controlled open
valve can also be closed early without changing the program
data (watering start time, watering duration, watering cycle).
v Turn the rotary knob to Off.
The watering program is deactivated.
To reactivate the watering program turn the rotary knob
to Prog.
1. To preserve the battery, it should be removed
(see 4. Putting Your Water Computer into Operation).
When the battery is inserted again in spring, the watering
program must be newly entered again.
2. Store controller and valve unit in a dry place where they are
protected from frost.
111