BaByliss G940E Manual página 55

4. Please wear safety glasses when using the appliance.
5. Firmly press the applicator surface against your skin so that contact is full. Once the applicator surface
is in full contact with your skin, the 'Ready' indicator light will start to fl ash.
6. Press the release button. The appliance will release a pulse onto the skin and the 'Ready' indicator
light will go out.
7. Remove the applicator surface from the treated area of skin.
8. Wait 5 seconds then move the applicator surface to another area to be treated. After 1.6 seconds (at level 1),
the 'Ready' indicator light will light up again. The appliance is then ready to release another pulse.
Again, wait 5 seconds before moving the applicator surface to another area to be treated.
To treat the face, it is imperative that you wait 5 seconds between fl ashes.
The duration of the Homelight depilation session on the face should not exceed
10 minutes.
9. To remove the special face fi lter, switch off the appliance and disconnect it from the mains. Take
hold of the fi lter by carefully pressing the two ends between your thumb and index fi nger and
remove it from the head of the appliance. Caution, the appliance surfaces may be hot. Do not touch
the special face fi lter lens with your fi ngers.
The special face fi lter is designed for removing facial hair in Precision mode. It is not
designed for treatments in Gliss mode.
Remove the face fi lter from the Homelight appliance to treat legs, back and arms
in Gliss mode.
6.6. Approximate duration of the session
Area
Half-leg
Leg
Bikini line
Underarm
Average duration
8 to 10 minutes
15 minutes
2 minutes
1 minute
Mode
Gliss
Gliss
Precision
Precision
57