GYS TITAN 400 DC Manual Del Operador página 31

• The mode E-TIG (Fig 2 - 9)
This mode ensures that the power is stable throughout the weld by measuring the variations in arc length in real time. This is important to ensure a
consistent penetration and weld bead. In case the assembly requires the welding power to be controlled, the E.TIG mode can be used as it is designed
to ensure that the welding power remains the same regardless of the position of the torch.
A
-
TIG HF TIG
lift
MMA PULSE
2T 4T
The grey areas are not useful for this mode.
TIG - ADVANCED MENU
It is possible to access the end of welding cycle settings.
Access to these advanced parameters is possible via the menu
Using the scroll-wheel, the available advanced settings are :
Parameter Description
Current threshold when
starting the weld.
I Start
Time threshold when
starting the weld.
t Start
Current threshold when
the weld stops.
I Stop
Time threshold when the
weld stops.
t Stop
Pulse with wave shape.
Shape
(wave shape)
Pulse current spot wel-
ding duration.
t Pulse
Spot welding duration in
continuous current.
t Continuous
COMPATIBLE TORCHES
Trigger
L
For the 1 button torch , the button is called «main button».
DB
For the 2 buttons torch , the first button is called «main button» and the second button is called «secondary button».
TITAN 400 DC
I MADE IN FRANCE
%I A
% t
Hz
A
t(s)
I
%
+
setup
OK
4T SPOT TACK PULSE
LOG %I
Mode E-TIG
Setting
10% - 200%
0s - 10s
10% - 100%
0s - 10s
Square
Sinus
Triangle
Trapeze
Manual,
0.1s – 10s
Manual,
0.1s – 10s
L
Double Button
DB
P
V
Hz
2 mm
kJ
D
JOB
E. TIG
5 mm
D
STD PULSE SPOT TACK
X X
X X
X X
X X
X
X
L
X X
DB
Double Button + Potentiometer
Standard
(constant current)
5 mm
D
E-TIG
(constant power)
2 mm
D
.
Recommendation
This current threshold is a phase before the
current upslope.
This current threshold is a phase before the
current upslope.
The square wave shape is the traditional
shape for PULSE welding but it is noisy in high
frequency. Other shapes can be used to adapt
the penetration and the noise level.
The spot welding times allow to define a spot
that can be reused over time.
P
EN
10 mm
D
10 mm
D
31