Idiomas disponibles
Idiomas disponibles
eStore
11
Cleaning eStore
A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning
as these may damage the product.
➤ Occasionally clean the product with a damp cloth.
12
Troubleshooting
Problem
No voltage at the
battery terminals.
EN
Cause
The main switch is turned off
(open).
The fuse is defective.
eStore is in storage mode.
eStore is not configured cor-
rectly.
eStore is over discharged.
eStore is defective.
Cleaning eStore
Remedy
➤ Turn on (close) the main
switch.
➤ Replace the fuse (see
chapter "Changing the
fuse" on page 20).
➤ Activate eStore.
➤ Configure eStore.
➤ Charge eStore with a
charging current of <10 A.
Note: Do not use intelligent
charging systems (with
main swtich open, the
eStore terminals have no
voltage. Some intelligent
battery chargers do not
start if no voltage is pre-
sent).
➤ Contact an authorised
workshop.
21
