Hamilton Beach FlexBrew TRIO 49911 Manual Del Usuario página 11

Cafetera inteligente
Idiomas disponibles

Idiomas disponibles

Troubleshooting –
WiFi indicator is flashing red and blue.
Loss of power. Wait a few minutes and your Coffee Maker will
automatically reconnect to internet.
Name or password to WiFi access changed. Reconnect with QR code
or user-guided internet setup.
Loss of internet service. Contact your ISP to verify any reported
outages.
WiFi indicator is not solid blue.
Coffee Maker is not connected to internet. Reconnect Coffee Maker
to internet with QR code or user-guided internet setup.
QR code internet setup (preferred setup)
1. Before starting, have name and password to your WiFi access in
case it's needed.
2. Plug in Coffee Maker and perform a factory reset (see Factory
Reset at right).
3. Make sure Alexa App is on your device (download from Apple
App Store or Google Play Store).
4. In Alexa App, select devices icon along bottom.
5. Next, click the + icon in top right corner.
6. Choose "Add Device", then select "Coffee Maker" from list of
devices that appear.
7. Select "Hamilton Beach," then select your model.
8. Allow Alexa App to use Bluetooth and camera so you can scan
QR code on back of Coffee Maker, then review privacy policy and
terms of use and tap "Next".
9. Make sure WiFi indicator is flashing red. Follow instructions on
App to connect Coffee Maker.
10. When finished, WiFi indicator should be solid blue.
NOTE: For your security, you have 5 minutes to complete setup
process before Coffee Maker turns off WiFi access. If WiFi indicator
stops flashing red, unplug and plug back in to restart 5-minute setup
timer again.
WiFi
Alternative user-guided internet setup
If QR code is missing from back of Coffee Maker or is damaged,
follow these steps.
1. Complete steps 1-8 from QR code internet setup.
2. On Alexa App page called "Locate the QR code for your Hamilton
Beach Coffee Maker", select "Don't have a barcode."
3. On Coffee Maker, press and hold WiFi Button for 3 seconds until
Button flashes pink.
4. Then press "Next" in App and follow remaining instructions.
5. When finished, WiFi indicator should be solid blue.
Factory Reset
1. While plugged in, press and hold
WiFi indicator will flash pink before turning off.
2. Release WiFi Button and after 5 seconds, Button will slowly flash
red. Then restart QR code or user-guided setup.
NOTE: Factory Reset will erase your internet connection information.
Close and reopen Alexa App to confirm deletion of Coffee Maker.
(WiFi) Button for 15 seconds.
11
loading