Set Alarm Lighting To On/Off; Adjust Volume - LEGRAND care NOVO Go Manual Del Usuario

5 NOVO Go DOCK Configuration mode
Configuration mode supports local configuration of the alarm button lighting and the
loudspeaker volume.
5.1 Set Alarm Button Lighting to On/Off
1. Open the lid on the bottom of NOVO Go DOCK.
2. Press the On/Off button
3. Press and hold the Alarm button
4. Release the Alarm button when NOVO Go DOCK makes a sound again.
5. Close the lid.
The function operates as follows:
■ If the alarm lighting was set to on, it goes off.
■ If the alarm lighting was set to off, it comes on.
RELATED CHAPTER(S)
2 Your NOVO Go DOCK
5.2

Adjust Volume

1. Open the lid on the bottom of NOVO Go DOCK.
2. Press the On/Off button
3. Press and hold the Extra button
volumes as follows:
º One signal/Low volume.
º Two signals/Medium volume.
º Three signals/High volume.
4. Release the Extra button after the signal(s) of the selected volume.
5. Close the lid.
RELATED CHAPTER(S)
2 Your NOVO Go DOCK
NOVO Go DOCK User Manual NE41 21003-02 (EN)
. The Extra button flashes yellow.
. NOVO Go DOCK makes a sound.
. The Extra button flashes yellow.
. The number of signals represents different
12