7.1 Charge With Usb Charger; Operational Functions; Standby Mode; Status Check - LEGRAND care NOVO Go Manual Del Usuario

8

Operational Functions

8.1

Standby Mode

When NOVO Go is in standby mode, all lights are set to Off.
After a procedure, NOVO Go goes back to standby mode after 2 to 5 seconds.
8.2

Status Check

Do a status check of NOVO Go as follows:
1. Press the Extra button
2. The Alarm button shows one condition as follows:
Red: Battery
charged 21–40 %
RELATED CHAPTER(S)
2 Your NOVO Go
3 Get Started with NOVO Go

7.1 Charge with USB Charger

8.3

Mobile Network Connection Status

If the Network icon flashes, NOVO Go cannot find connection to the mobile network
and no alarm can be sent.
The Network icon goes off when NOVO Go finds connection.
8.4

Device Temperature

If NOVO Go gets too hot, all LED lights start to flash and most functions go off. Correct
functionality is restored when NOVO Go gets a lower temperature.
NOVO Go User Manual NE41 21002-02 (EN)
.
Yellow: Battery
charged 41–60 %
Green: Battery
charged 61–100 %
12