LEGRAND care NOVO Go Manual Del Usuario página 27

3 Get Started with NOVO Go DOCK
1. Remove NOVO Go DOCK from the box.
2. Examine the contents for missing or defect items. If something is missing or defect,
speak with your Legrand Care distributor.
3. Keep NOVO Go DOCK on something stable near a wall socket.
4. Open the lid on the bottom of NOVO Go DOCK.
5. Remove the plastic protection from the Micro-USB connector.
6. Connect the Micro-USB connector and carefully attach the cable to the hooks, refer
to the image below.
7. Connect the AC adapter to the wall socket. NOVO Go DOCK sets to on
automatically.
8. Pair NOVO Go DOCK with NOVO Go, refer to
3.3 Pair NOVO Go DOCK and NOVO
9. Keep/Put NOVO Go in NOVO Go DOCK.
10. Do a test to make sure that NOVO Go DOCK operates correctly, refer to
4.3 Send Alarm with NOVO Go
11. Remove NOVO Go from NOVO Go DOCK and do step 10 again.
12. If NOVO Go does not send alarms, speak with your Legrand Care distributor.
13. If NOVO Go sends alarms, you are good to go!
NOVO Go DOCK User Manual NE41 21003-02 (EN)
Go.
DOCK.
6