Idiomas disponibles
Idiomas disponibles
3
Description
3.1
Overview of the product
3.2
Intended use
The product described is a hand-held cordless drill/driver. It is designed for driving and removing screws
and for drilling in steel, wood and plastic.
Use only Hilti lithiumion batteries of the B 22 series with this product.
•
•
Use only Hilti-approved battery chargers to charge these batteries. More information is available from
your Hilti Store or from www.hilti.group
3.3
ATC
The product is equipped with the ATC (Active Torque Control) quick-acting electronic cut-out.
If the accessory tool sticks or stalls, the product will suddenly pivot about its own axis in the opposite direction.
ATC detects this sudden pivoting movement of the product and switches the product off immediately.
For ATC to function correctly, the product must be free to pivot.
After an ATC cut-out, switch the product off and then on again.
3.4
Liion battery display
The charge status of the Li-ion battery and malfunctions of the power tool are indicated by the display on
the Liion battery. The charge status of the Liion battery is displayed after pressing one of the two battery
release buttons.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks, the power tool is ready for use.
1 LED blinks, the power tool is not ready for use.
4 LEDs blink, the power tool is not ready for use.
18
English
1
@
;
=
%
&
(
)
+
§
/
:
∙
Meaning
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
The battery has overheated or is completely dis-
charged.
The power tool is overloaded or has overheated.
Side handle
Keyless chuck
Torque and drilling mode selector ring
Gear selector switch
Forward/reverse switch with switch-on inter-
lock
Control switch (with electronic speed control)
Grip
Light to illuminate the work area
Belt hook (optional)
Liion battery
Battery release button
State of charge and fault display (Li-ion bat-
tery)
2130485
*2130485*
