Zipper ZI-MD500HST Instrucciones De Servicio página 39

Only a properly maintained equipment may be a satisfactory tool. Care and maintenance
deficiencies can cause unpredictable accidents and injuries.
Repairs should be performed only by authorized service centers.
Improper operation may damage the equipment or endanger your safety.
14.1 Maintenance plan
Regularly prior to each operation
Regularly prior to each operation
Regularly prior to each operation
Regularly prior to each operation
Regularly after operation
Every 25 working hours
Every 25 working hours
Every 20-30 working hours
Every 50 working hours
14.2 Cleaning
Clean the machine and the working attachment from soil, dust, grass, chips, and small twigs, etc.
The use of solvents, harsh chemicals or abrasive cleaners leads to damage to the machine!
Therefore: When cleaning, use only mild detergents. The use of high pressure cleaners is not
recommended. It shortens the service life and reduces the operational integrity. (Water can
get into the gear!)
Impregnate bare surfaces of the machine against corrosion (e.g., anti-rust WD40).
14.3 Engine
Information about engine maintenance you can find in operation manual of the engine manufacturer!
14.3.1 Engine oil exchange
The engine oil change would be explicitly mentioned here in order to be included in the machine
operating manual. Oil change interval after the first 20h or 1 month after commissioning and then every
100h or 1x per year.
Waste oils are toxic and must not be released into the environment!
Contact your local authorities for information on proper disposal.
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
N O TE
Controls for the maintenance of the machine
N O TE
N O TE
Loose or lost screws, nuts, bolts
Damage of any part of the machine
Fuel tank of tightness
Track checking
Machine cleaning
Lubricate the moving parts
Cleaning spark plug
Cleaning air filter
Oil level checking
MAINTENANCE
39
ZI-MD500HST