Steinberg Systems SBS-PH-140 Manual De Instrucciones página 18

5 - LCD display for temperature
measurements
6 - Conductivity calibration timer
7 - MODE button
8 - pH calibration trimmer
3.2. Preparation for operation
POSITIONING OF THE UNIT
Place the unit in a way that ensures good air circulation. Keep the unit away from
any hot surfaces. Always operate the unit on a level, stable, clean, fireproof and dry
surface and out of the reach of children and persons of impaired mental, sensory
and intellectual functions. Place the unit in such a way that the mains plug can be
reached at any time. Ensure that the power supply to the unit corresponds to that
specified on the identification plate!
ASSEMBLY OF THE UNIT
The device is designed to be installed on a working surface. If there is a need to
mount
in a vertical position when working with it, install the mounting bracket (15) or
mount the work surface directly into the dedicated mounting indentations of the
rear housing of the unit. When installing the mounting bracket (15), attach the
longer arm to the dedicated hooks on the rear housing of the unit, and attach the
shorter
Mounting the device onto the work surface should be performed in accordance with
the standards and regulations prevailing in a given country.
arm to
15 - Mounting bracket
16 - Screwdriver
17 - Inlet for connecting the pH probe
18 - Inlet for connecting the
temperature probe
the
the operating
device
surface.