Test Notes; Tests Before The First Commissioning - SICK L 4000 Manual De Instrucciones

Ocultar thumbs Ver también para L 4000:

Tabla de contenido

Idiomas disponibles

Operating Instructions

L 4000 system

Fig. 20: L 4000 (M30)

alignment aid adapter for

8010009/TI69/2009-11-26

Commissioning

Test notes

The purpose of the tests before the first commissioning is to confirm

the safety requirements specified in the national/international rules

and regulations, especially in the Machine and Equipment Usage Di-

rective (EU Conformity).

To ensure correct function, test as defined in chapter 6.3.2 "Daily

functional checks of the protective device".

Number of senders and receivers must match, the distance be-

tween them must not exceed the maximum value given in the

technical specifications.

Access to the hazardous point must only be possible through the

protective field.

It must not be possible to climb over, creep underneath or pass

around the protective device.

Also test the effectiveness of the protective device mounted on the

machine using all selectable operating modes as specified in the

checklist (see chapter 11.2 on page 328). Use this checklist as a

reference before commissioning the system for the first time.

Alignment aid adapter

Tabla de contenido