Idiomas disponibles
Idiomas disponibles
REPLACING THE OVEN LAMP
DANGER:
Before replacing the oven lamp, make sure that the product is disconnected from
mains and cooled down in order to avoid the risk of an electrical shock. Hot
surfaces may cause burns!
The oven lamp is a special electric light bulb that can resist up to 300 °C. See
"Technical Specifications" for details. Oven lamps can be obtained from
Authorized Service Agents.
Position of lamp might vary from the figure.
For replacing the lamp, follow the next steps:
Disconnect the product from mains;
1.
Turn the glass cover counter clockwise to
2.
remove it;
Remove the oven lamp by turning it counter
3.
clockwise and replace it with the new one;
Install the glass cover.
4.
TROUBLESHOOTING
The oven emits steam when it is in use
•
It is normal that steam escapes during operation >>> This is not a fault.
The oven emits metal noises while heating and cooling
•
When metal parts heated, they may expand and cause noise >>> This is not a fault.
The oven doesn't operate
•
The mains fuse is defective or has tripped >>> Check fuses in the fuse box. If necessary,
replace or reset them.
•
The oven is not plugged into the (grounded) socket >>> Check the plug connection.
The oven light does not work
•
The lamp is defective >>> Replace the oven lamp.
•
Power is off >>> Check that there is electrical power. Check the fuses in the fuse box. If
necessary, replace or reset the fuses.
The oven does not heat
•
Function or temperature not set >>> Set the function and the temperature with the function
and temperature knob.
•
On models with a timer, the timer is not adjusted >>> Adjust the timer.
•
There is no electrical power >>> check fuses in the fuse box.
In the event of a malfunction, do not try to repair the device yourself. Contact a
qualified JOCEL technical assistance service for this purpose.
56
