Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Wear Limit
0.67" (17 mm)
NOTE: Use HITACHI carbon brush No. 43 indicated
in Fig. 28.
5.
Replacing carbon brushes
Disassemble the brush caps with a slotted-head
screwdriver. The carbon brushes can then be easily
removed.
6.
Service and repairs
All quality power tools will eventually require
servicing or replacement of parts because of wear
from normal use. To assure that only authorized
replacement parts will be used, all service and
repairs must be performed by a HITACHI
AUTHORIZED SERVICE CENTER, ONLY.
WARNING: ALWAYS use Only authorized HITACHI replacement parts and accessories. NEVER use
replacement parts or accessories which are not intended for use with this tool. Contact
HITACHI if you are not sure whether it is safe to use a particular replacement part or accessory
with your tool.
The use of any other attachment or accessory can be dangerous and could cause injury or
mechanical damage.
NOTE: Accessories are subject to change without any obligation on the part of the HITACHI.
STANDARD ACCESSORIES
(1) Blade (Code No. 725362) ......................................................................................................................................... 1
(2) Case (Code No. 321142) ........................................................................................................................................... 1
(3) Allen wrench (Code No. 944458) ............................................................................................................................ 1
OPTIONAL ACCESSORIES
(1) Cut off guide for cutting pipe
Product
Cutting application
Cut-off
Outer diamaeter
guide (L)
75mm – 165mm
NOTE: Please refer to the cut off guide user's manual for details on how to use it correctly.
No. of Carbon
Brush
43
0.24" (6 mm)
Fig. 28
ACCESSORIES
sold separately
Blade used
No. 725331
7.
Service parts list
CAUTION:
Repair, modification and inspection of Hitachi
Power Tools must be carried out by a Hitachi
Authorized Service Center.
This Parts List will be helpful if presented with the
tool to the Hitachi Authorized Service Center when
requesting repair or other maintenance. In the
operation and maintenance of power tools, the
safety regulations and standards prescribed in
each country must be observed.
MODIFICATIONS:
Hitachi Power Tools are constantly being improved
and modified to incorporate the latest
technological advancements.
Accordingly, some parts may be changed without
prior notice.
Code No.
330852
English
13
Tabla de contenido
