Idiomas disponibles
Idiomas disponibles
ENGLISH
Even though the appliance is provided with all
its safety devices, during the installation and
connection procedures it may be necessary to
supplement it with other safety devices in ac-
cordance with applicable laws.
The position of the devices is shown in the pic-
ture.
Gas supply tap: to open and close the con-
A)
nection to the gas supply line.
Safety thermocouple: to cut off the gas sup-
B)
ply if the fl ame extinguishes.
Safety thermostat: to cut off the gas supply
C)
to the oven burner if the oven's overheats.
WARNING: Make a daily check that
the safety devices are properly installed and
in good working order.
The position of the signs provided is shown in
the picture.
Manufacturer and appliance nameplate.
A)
WARNING: read the manual carefully
B)
before carrying out any procedure.
WARNING: when washing the appli-
C)
ance, do not point pressurised water jets at
internal parts.
WARNING draws attention on com-
D)
pliance with the rules. "Install in compliance
with the applicable regulations and use in
well ventilated premises only".
WARNING draws the attention on
E)
compliance with the rules. "The Manufac-
turer declines all liability in case of failure to
comply with the installation and commis-
sioning instructions".
4
SAFETY DEVICES
SAFETY AND INFORMATION SIGNS
B
B
C
E
D
F
37M3202
C
B
WARNING: watch out for hot surfac-
F)
es.
CE Marking: it indicates that the equipment
G)
is compliant with all relevant laws applicable
to the product.
SAFETY
A
G
A
3386390_ut_GB
