Idiomas disponibles
Idiomas disponibles
5....-05-HTD 2832
1. Fully unwind the mains cable.
2. Fit on a nozzle. You can dry single hair locks by concentrating the flow of hot air
with the hairdressing nozzle. The diffuser is the ideal solution to dry curly hair
without losing volume.
3. Only connect the machine to a properly installed safety socket, 230 V/50 Hz.
4. Setting the Temperature Level (right switch):
Position 1:
Position 2:
Position 3:
Setting the desired blower strength (left switch):
Position 0: OFF
Position 1: gentle stream of air
Position 2: strong stream of air
COOL-Shot:
TURBO button: By pressing the turbo button you can increase the air current
Clean the air suction opening from time to time with a fine brush. Clean the hou-
sing with a soft, dry cloth without additives.
Removing the air suction cover
Remove the cover after turning the cap through approximately 30 degrees against
a clockwise direction. Remove the intake filter and clean under running water. Dry
the filter well before mounting again!
This device has been tested according to all relevant current CE guidelines,
such as electromagnetic compatibility and low voltage directives, and has been
constructed in accordance with the latest safety regulations.
Subject to technical changes without prior notice!
03.09.2003 10:23 Uhr
Commissioning
cold air
medium temperature for gentle drying and shaping
high temperature for rapid drying
With this switch it is possible to interrupt the heating
process so that the air can be mixed according to individual
requirements.
even further.
Cleaning and care
Seite 21
21
GB
