Makita DBN500 Manual De Instrucciones página 7

Clavadora inalámbrica
Ocultar thumbs Ver también para DBN500:
Idiomas disponibles

Idiomas disponibles

Adjusting the nailing depth
WARNING:
Always make sure that your fingers are not
placed on the trigger, and the battery cartridge
and nails are removed.
A A
A
► 1. Adjuster
To get shallower depth, turn the adjuster to A direction
as shown in the figure. To get deeper depth, turn the
adjuster to B direction.
Do not turn the adjuster too much, or the adjuster may
get stuck.
Lighting up the lamp
CAUTION:
Do not look in the light or see the source of light
directly.
1
► 1. Lamp 2. Trigger 3. Driver guide (contact element)
To turn on the lamp, pull the trigger or place the contact
element against the workpiece. Release the trigger or
contact element to turn it off.
The lamp goes out 10 seconds after releasing the trig-
ger or contact element from the workpiece.
NOTE:
Use a dry cloth to wipe the dirt off the lens of
lamp. Be careful not to scratch the lens of lamp,
or it may lower the illumination.
Even in the lamp lights up when the battery
power residual gets small, the nailer may not fire
nails. In this case, charge the battery cartridge.
1
B
B B
3
2
ASSEMBLY
CAUTION:
Always make sure that your fingers are not
placed on the trigger, and the battery cartridge
and nails are removed before carrying out any
work on the nailer.
Loading or unloading the nails
CAUTION:
Always make sure that your fingers are not
placed on the trigger and the battery cartridge is
removed before loading nails.
Do not abruptly slide the slide door of the nailer
loaded with nails. Accidentally dropping nails
especially when working in high places may
cause personal injuries.
Load nails in the correct direction. Loading in
wrong direction may cause premature wear and
tear of the driver and damage of the other parts.
Do not use deformed connected nails. Use nails
specified in this manual. Using nails other than
those specified may cause nail jamming and
breakage of the nailer.
3
► 1. Lock lever 2. Slide door 3. Driver guide
4. Magazine
Press the lock lever and open the slide door of the
magazine.
3
► 1. Nails 2. Slide door 3. Driver guide
7 ENGLISH
1
2
4
2
1
loading