Parkside PSG 85 B2 Traduccion Del Manual De Instrucciones Originale página 31

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 126
The grinding disc nut must not be
screwed too tightly in order to
avoid a breaking of the grinding
disc and nut.
7. Trial run: Always carry out a trial run
of at least 30 seconds duration without
load before carrying out your fi rst grind-
ing procedure and after every grinding
disc replacement. Switch the device off
immediately if the disc is not rotating
smoothly, if considerable vibration oc-
curs or if you hear abnormal noises.
Transport
• Always transport the device with one
hand on the grinding head (2) and the
other hand on the grinding base (8).
• Never carry the device by its connec-
tion cable.
Storage
Store the device in a dry and dustproof lo-
cation and out of reach of children.
Grinding discs must be dry and
stored upright and should never be
stacked.
Waste disposal/envi-
ronmental protection
Return the tool, accessories and packag-
ing to a recycling centre when you have
fi nished with them.
Electrical devices do not belong in
domestic waste.
• Hand over the device at an utilization
location. The plastic and metal parts
employed can be separated out and
thus recycled use can be implemented.
Ask our Service-Center for details.
• Defective units returned to us will be
disposed of for free.
Guarantee
Dear Customer,
This equipment is provided with a 3-year
guarantee from the date of purchase.
In case of defects, you have statutory rights
against the seller of the product. These
statutory rights are not restricted by our
guarantee presented below.
Terms of Guarantee
The term of the guarantee begins on the
date of purchase. Please retain the original
receipt. This document is required as proof
of purchase.
If a material or manufacturing defect occurs
within three years of the date of purchase
of this product, we will repair or replace –
at our choice – the product for you free of
charge. This guarantee requires the defec-
tive equipment and proof of purchase to be
presented within the three-year period with
a brief written description of what consti-
tutes the defect and when it occurred.
If the defect is covered by our guarantee,
you will receive either the repaired product
or a new product. No new guarantee pe-
riod begins on repair or replacement of the
product.
Guarantee Period and Statutory
Claims for Defects
The guarantee period is not extended by
the guarantee service. This also applies for
replaced or repaired parts. Any damages
and defects already present at the time of
purchase must be reported immediately af-
ter unpacking. Repairs arising after expiry
of the guarantee period are chargeable.
GB
MT
31
loading