Panasonic CZ-ANC3 Instrucciones De Funcionamiento página 6

Using the unit
1
1
To start or stop individual groups of
indoor units
Press ON/OFF button corresponding to the
group of indoor units.
2
To start indoor units in groups numbered
between 1 and 16 at the same time
Press the ALL ON button.
The units start operating at intervals of 1 to
2 seconds, starting with group number 1.
3
To stop indoor units in groups numbered
between 1 and 16 at the same time
Press the ALL OFF button.
You cannot set the operating mode or
z
temperatures on this unit. Perform those
operations from the wired remote controller,
system controller, etc.
6
(EN)
2 3
Using the name plate
These let you know which rooms or areas the
air conditioners you can control are in, and you
can see the operational status with the operation
indicator lamps.
1
Push a pointy object into the hole on the
left of the transparent cover to remove
the cover.
2
Enter the name of the room or the area
on the included switch display label with
a pen, then stick on the name plate.
Name plate