Idiomas disponibles
Idiomas disponibles
Troubleshooting
Troubleshooting
Troubleshooting
Dacor works hard to ensure that you do not have problems with your new electric
oven. If you run into unexpected trouble, look first for a solution in the tables
below. If you are still having trouble after trying the suggested solution, call Dacor
Customer Service.
CONTROL DISPLAY
Problem
Possible cause
The display
A fuse in your home may be
goes blank.
blown or the circuit breaker
tripped.
The buttons
There is foreign matter
•
cannot be
caught between the
pressed
buttons.
properly.
•
Touch model: There is
moisture on the exterior.
•
The lock function is set.
50 English
DOB30x977Dx_AA_DG68-01313A-01_EN+MES+CFR.indb 50
DOB30x977Dx_AA_DG68-01313A-01_EN+MES+CFR.indb 50
OVEN
The oven will
not turn on.
Solution
Replace the fuse or reset the
circuit breaker.
Remove the foreign
•
matter and try again.
Remove the moisture and
•
try again.
•
Check whether the lock
function is set.
The oven light
will not turn
on.
Problem
Possible cause
The oven is not completely
plugged into the electrical
outlet.
A fuse in your home may be
blown or a circuit breaker
may have tripped.
The oven controls have been
set improperly.
The oven is too hot.
Incomplete service wiring.
Power outage.
The light is loose or defective.
The switch operating the light
is broken.
Solution
Make sure the electrical
plug is inserted into a live,
properly grounded outlet.
Replace the fuse or reset the
circuit breaker.
See the Operating the oven
section starting on page 18.
Allow the oven to cool.
Call for service.
Check to see if the house
lights will turn on. If
necessary, call your local
electric company for service.
•
Tighten or replace the
lamp.
•
Call for service if the
door light does not turn
on.
Call for service.
2023-03-14 오전 10:30:43
2023-03-14 오전 10:30:43
