Idiomas disponibles
Idiomas disponibles
Hex wrench storage
► 1 . Hex wrench
When not in use, store the hex wrench as shown in the
figure to keep it from being lost.
Carry hook
The carry hook is convenient for temporarily hooking
the tool. It can be installed on either side of the tool.
When removing the carry hook, widen it by pressing its
right ends ON BOTH SIDES in the directions of arrow
(1) and raise it in the direction of the arrow (2).
2
1
► 1 . Hook
1
1
1
OPERATION
1
2
3
► 1. Side blade 2. Side blade surface 3. Center blade 4. Workpiece
CAUTION:
•
Edges and chips of the workpiece are sharp.
Wear gloves. Otherwise it can cause injury.
Secure the workpiece firmly. Move the tool forward keep-
ing the side blades flush with the workpiece surface.
Adjusting shear blade
2
3
4
► 1 . Screws 2. Side blade L 3. Center blade 4. Side
blade R 5. Sleeve
Adjust the side blade L so that the curl of waste material
does not contact the cutting head or the workpiece. Use
the hex wrench to loosen the three screws which hold the
cutting head. Move the side blade L back and forth to adjust
it. Then tighten the three screws with the hex wrench.
8 ENGLISH
4
1
5
