Operation; Display And Function Buttons - Futurelight DJ-HEAD 250 SPOT Manual Del Usuario

OPERATION

After you connected the effect to the mains, the DJ-HEAD 250 SPOT starts running. During the Reset, the
motors are trimmed and the device is ready for use afterwards.

Display and function buttons

•
Press the Mode button and select from the functions:
A001 - DMX 512 Address settings:
Use the Up and Down buttons to select required address and press Enter to confirm or Mode to cancel and
return to the main menu.
COL - Linear Color
With this function you can adjust Step Color or Linear Color.
•
Press the Mode button and select „COL".
•
Press the Up button to select "y" if you wish to enable this function or press the Down button to select
"n" if you don't.
•
Press Enter to confirm.
PAN - Pan Reverse
With this function you can reverse the Pan-movement.
•
Press the Mode button and select „PAN".
•
Press the Up button to select "y" if you wish to enable this function or press the Down button to select
"n" if you don't.
•
Press Enter to confirm.
TIL - Tilt Reverse
With this function you can reverse the Tilt-movement.
•
Press the Mode button and select „TIL". •
Press the Up button to select "y" if you wish to enable this function or press the Down button to select
"n" if you don't.
•
Press Enter to confirm.
DEM - Demo operation
In the Stand Alone mode, the DJ-HEAD 250 SPOT can be used without controller. Disconnect DJ-HEAD 250
SPOTfrom the controller and call up the internal program.
•
Press the Mode button and select „DEM".
•
Press the Up button to select "y" if you wish to enable this function or press the Down button to select
"n" if you don't.
•
Press Enter to confirm.
RST - Reset Function
This option enables the DJ-HEAD 250 SPOT to index all effects (functions) and return to their standard
positions.
•
Press the Mode button and select „RST".
•
Press the Up button to select "y" if you wish to enable this function or press the Down button to select
"n" if you don't.
•
Press Enter to confirm.
DIS - Display-reverse
With this function, you can rotate the display by 180°.
•
Press the Mode button and select „DIS".
•
Press the Up button to select "y" if you wish to enable this function or press the Down button to select
"n" if you don't.
•
Press Enter to confirm.
31/68 00025523.DOC, Version 1.2