Tabla de contenido
Idiomas disponibles
Idiomas disponibles
- - -m
The symbol
determines the minimum distance from lighted objects. The minimum distance
between light-output and the illuminated surface must be more than this value.
The device must only be installed on a non-flammable surface. In order to safeguard sufficient ventilation,
leave 50 cm of free space around the device. Please note that heat-sensitive objects may be deformed or
damaged by the emitted heat.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
For overhead use (mounting height >100 cm), always fix the fixture with an appropriate safety-rope. Fix the
safety-rope at the correct fixation points only. The safety-rope must never be fixed at the transport handles!
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly
fastened.
The lamp must never be ignited if the objective-lens or any housing-cover is open, as discharge lamps may
explose and emit a high ultraviolet radiation, which may cause burns.
The maximum ambient temperature T
= 45° C must never be exceeded.
a
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.
DESCRIPTION OF THE DEVICE
Features
DJ Moving-Head spot
• Optimized optical system for highest light output
• Rotating gobo-wheel with 6 indexable rotating gobos plus open
• All gobos are interchangeable
• Colour-wheel with 9 different, dichroic colour-filtres plus white
• Via the combination of dichro-gobos and color-wheel even more colour-combinations possible
• Rainbow-effect in both directions
• High-speed rotating 3-facet prism
• Motorized focus
• Strobo effect 1-10 flash per sec.
• Remotely controllable speed of Pan/Tilt movement for easy programming
• Remote reset function
• Pan-movement range 530°
• Tilt-movement range 280°
• Automatic Pan/Tilt position correction
• High luminous-efficiency parabolic mirror and double condenser system
• 15° standard objective
• Control-Board with 4-digit display for adjusting the DMX-starting address
• For MSD/HSD 250 or MSD 250/2 lamp
• DMX-control via every standard DMX-controller
24/68
00025523.DOC, Version 1.2
Tabla de contenido
