Idiomas disponibles
Idiomas disponibles
3.6
Approvals
Declaration of Conformity: see Supplement 9300785 or
www.draeger.com/product-certificates
For further information on approvals, see Supplement 9300785.
4
Use
4.1
General information for use
WARNING
If the thermal imaging camera is used as the sole navigation source, a
malfunction can result in a loss of orientation, injury or even death of persons.
► Do not use the thermal imaging camera as the sole navigation source.
–
To avoid deep discharge of the battery, charge it immediately after receiving
the thermal imaging camera.
–
The operating time of any battery is reduced if it is used in environments with
high or very low temperatures.
–
The thermal imaging camera is a complex electro-optical device and may
exhibit malfunctions like any other electronic system. In the event of a
camera failure, the user will not receive any more thermal images. When
using this thermal imaging camera on tactical missions, follow the
procedures that have been put in place for operations without a thermal
imaging camera.
–
All users must familiarise themselves with the proper function and the
performance limits of the thermal imaging camera before use. This includes
general understanding of thermal images and how they are interpreted.
Dräger recommends Dräger Academy or third-party training, e.g., at a
firefighter school. Contact Dräger for additional information.
–
The USB interface may only be used in non-explosion-hazard areas.
Dräger UCF FireCore
|
Use
en
21
