Sony ID Telephone SPP-ID200 Manual De Instrucciones página 24

/ Speed dialing
!
The phone number with more
than 10 digits cannot be shown
on the display at a time.
The first 10 digits are shown for
about 5 seconds, then the
remaining digits appear on the
display.
Be sure not to cover the ringer hole.
If you do, it will be difficult to hear the ringer.
24
Speed dialing
p If you use a Private Branch Exchange (PBX)
You need to dial a digit (such as 9) to access an outside line before
you dial a phone number.
To store the phone number:
1 Enter the outside line access digit.
2 Press PAUSE to enter a pause (to allow the phone time to
access the outside line.)
3 Enter the phone number you want to store.
p To check and dial the phone number stored in
the speed dialing
You can dial a stored phone number after checking it on the
display.
To check and dial a stored phone number:
1 Press SPEED DIAL.
"ENTER 0~9" appears on the display.
2 Press the desired speed dialing number (0 to 9).
The phone number stored in the speed dialing number appears
on the display.
3 Press TALK/DIAL while the phone number is shown on the
display
The phone automatically dials the number displayed.
p To keep a directory
Use the directories supplied. Following is an example of directory
usage.
1
2
3
Write down the names of
persons or places whose
numbers you have stored in
the buttons.
Peel off the directory.
Attach the directory to a desired
location except on the ringer hole.
SPP-ID200(ES) 3-810-886-11(1)