NAVEE V40 Pro Información Importante página 5

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
Care & Maintenance Plan
EN
The expected service life for NAVEE electric scooters is 3 years, and the expected mileage is 10000 km. When
the scooter is used for more than 3 years or the total riding mileage exceeds 10000 km, it is recommended to
have it serviced at an authorized repairer. The following table shows the recommended maintenance items and
frequencies.
Scooter Maintenance Schedule (Recommended):
Maintaining the scooter regularly can help keep the scooter neat and in good condition, avoid safety hazards,
minimize breakdowns, slow down the deterioration of the scooter, and extend the scooter's service life.
Service
Item
Actions
Object
Inflate the tire until its
Tire Pressure
pressure reaches
45-50 psi.
Tires
Tire Tread
Check whether the tire is
cracked, deformed, worn,
Wear
etc.
Tighten the screw that
connects the handlebar
assembly with the stem
assembly (with the
recommended torque of
4.8 ± 0.2 N·m).
Handlebar
Tighten the accelerator
Assembly
screw (with the
Screws
recommended torque of
1.6 ± 0.1 N·m).
Screws
Tighten the brake
lever screw (with the
recommended torque of
5 ± 0.2 N·m).
Tighten the screw that
Disc Brake
fixes the disc brake caliper
(with the recommended
Caliper
torque of 3.5 ± 0.5 N·m).
05
Every
Every 3
Every 500 km/
Every 1000 km/
Every 10000 km/
month
months
6 months
1 year
3 years
Service
Item
Actions
Object
Before adjusting, make sure the
scooter is turned off and not being
charged.
Tool: 4 mm hex key (the tool needs
to be prepared by the user).
During adjusting, pull the end of
the brake cable to make the cable
tight.
Notes:
Brake
· If the brake is too tight, use the
Adjustment
tool to loosen the screw by turning
it counterclockwise, pull the disc
brake rocker arm outwards, and
then tighten the screw. If the
brake is too loose, use the tool
to loosen the screw by turning it
Functions
counterclockwise, push the disc
brake rocker arm forwards, and
then tighten the screw.
Charge the scooter at a suitable
temperature. The indicator on
the battery charger is red when
the scooter is charging, and
Charging
turns green when the scooter is
fully charged. The control panel
will show the charging status
simultaneously during charging.
Turn the handlebar 60° to the left
and right to make sure the turning
Steering
angle is correct and the steering
is free from resistance and
stagnation.
Fully charge the scooter before
Important
Battery
leaving it unused for a long time,
and turn it on to charge every 60
Components
Assembly
days.
Every
Every 3
Every 500 km/
Every 1000 km/
Every 10000 km/
month
months
6 months
1 year
3 years
EN
06
loading