Toto LT645 Manual De Instrucciones Y Del Propietario página 4

1) Install the faucets and drain fittings
(not included) per the manufac-
turer's instructions.
2) Insert the tie hooks and packings
into the the mounting holes at the
bottom of the lavatory (see Ill. 1).
3) Place the lavatory onto the coun-
tertop while carefully aligning the
tie hooks with the holes in the
countertop.
4) Check to make sure the back wall
of the lavatory is flush with the wall;
adjust if necessary.
5) Place the washers onto the tie
hooks and install the wing nuts
(see Ill. 2).
6) Make sure the tie hooks are ori-
ented properly in the lavatory (see
Ill. 3).
7) Tighten all wing nuts until the lava-
tory is firmly held in position.
DO NOT OVERTIGHTEN.
Overtightening may damage
WARNING
the products and cause per-
sonal injury and/or property
damage.
INSTALLATION PROCEDURE
4
Ill. 1
Tie Hook
Packing
Ill. 2
Washer
Wing Nut
Ill. 3
TIE HOOK ORIENTATION DIAGRAM
Counter Table
TIE HOOK