Qilive Q.6505 Manual De Instrucciones página 10

2. TECHNICAL DATA
EN
Protection class
Power supply
Power consumption
Total volume (L)
Appliance dimensions (H x W x D)
Net weight
3. DESCRIPTION
1. Thermostat
2. Racks in door
3. Levelling foot
4. INSTALLATION
Warning! Disconnect the appliance from the wall outlet before you install the
combine refrigerator.
4.1 Unpack all parts
After unpacking, check for completeness of delivery and for shipping damage. If your
delivery is damaged or incomplete, please contact our after-sales service.
4.2 Choose an appropriate location
Warning!
Position the appliance so that it is not exposed to direct sunlight. This appliance
should not be used outdoors or exposed to rain.
Warning!
The appliance must be separated by a distance of at least 50 cm from heat
sources (such as stoves, ovens, radiators, etc.) and at least 5 cm from electric
ovens.
Warning!
Install the appliance in a place where the power plug is easily accessible for
power disconnection.
1. Place the combine refrigerator in a well ventilated room on a dry, stable and level
surface, away from direct sunlight and other heat sources.
2. Ensure sufficient air circulation at the rear of the appliance. Do not place the
appliance against a wall to avoid noise caused by vibration. Make sure that the air
can still circulate freely around the appliance. Insufficient ventilation would result in
malfunction and increased energy consumption. Leave a space of at least 10 cm
between the refrigerator and the side walls, 10 cm at the rear and 30 cm between the
top of the refrigerator and the ceiling.
3. Leave enough space to access and open the door easily. The required space for
opening the door is width (W) = 89.5 cm x depth (D) = 97.5 cm (
If necessary, change the direction of door opening as described below.
Class I
220 - 240 V~, 50 Hz
0.55 kWh/24h
259L
1800 x 545 x 580 cm
54 kg
4. Freezer drawers
5. Crisper
6. Glass shelves
10 10
Fig. 11).