Bosch BCS210 Instrucciones De Servicio Originales página 11

Start-up
Connecting the charger to the mains
(2)
Note the household voltage! The voltage of the
u
power supply must correspond to the specifica-
tions given on the battery charger nameplate.
Plug the device connector (3) of the power cable into
the device socket (2) on the charger.
Connect the power cable (country-specific) to the
mains.
Use only the supplied input connection: standard AC
power cord ((3) in the diagram) when connecting to
the household electrical supply.
Charging the eBike battery when removed
(11)
(6)
(5)
(6)
(5) Charging connector
(6) Socket for charging connector
Bosch eBike Systems
Operation
(2)
(3)
(9)
(10)
(8)
(8) Rack-mounted battery
(9) Operation/state of charge indicator
(10) On/off button for eBike battery
(11) Standard battery
Switch the eBike battery off and remove it from its
holder on the eBike. When doing so, read and ob-
serve the operating instructions of the eBike battery.
Ensure the eBike battery is placed on clean sur-
u
faces only. Avoid getting dirt, e.g. sand or soil, in
the charging socket and contacts in particular.
Plug the charging connector (5) of the charger into
the charging socket (6) on the eBike battery.
Charging the eBike battery when inserted in the
eBike
(7)
(5)
(5) Charging connector
(6) Socket for charging connector
(7) Charging socket cover
(11) Standard battery
English – 9
(11)
(6)
0 275 U07 XCX | (15.03.2023)