Idiomas disponibles
Idiomas disponibles
Sequencer
This feature allows you to trigger multiple products
sequentially from the remote output connections
(REM OUT). These outputs are activated and
deactivated in a programmed way, according to the
settings based on the signal received by the remote
input (REM IN).
The trigger interval between each output can be
configured from 0s to 4s.
When the configured time is 0s, all outputs will be
enabled or disabled simultaneously after 3s of the
absence of the remote signal at the input (REM IN).
SEQUENCER
Time
SEQUENCER
Time : 2.0
SEQUENCER
ON/OFF
SEQUENCER
S1: ON
You can turn each sequencer output on/off
independently. When the output is turned off,
it will not turn on when the processor is turned
on again.
Boost
When activated, the Boost option allows the
practicality of modifying the audio signal level
directly on the SMC home screen. So this function
adds a shortcut for a quick change.
s
44
Boosting can be done individually in the Master
Level settings and for each output channel. Thus,
when an output channel is selected, the boost
acts on the parametric equalizer of the respective
channel.
MAIN MENU
Boost
BOOST -> MASTER
OFF
To enable the function, simply select it from the
device's main menu. Once found, it is necessary to
select the "on" mode to turn on.
STETSOM
STX2436BT
BOOST -> MASTER
LEVEL: 100%
When the "boost" mode is activated, to adjust
the level of the audio signal output on the
desired channel, you need to go to the device's
home screen and turn the Encoder. After
adjusting the dB level, the home screen will
appear after 5 seconds.
[ON]
45
