Idiomas disponibles
Idiomas disponibles
EN-US
Introduction
Thank you so much for choosing a STETSOM
product!
The SMC is a remote controller that makes it
possible to view and change configurations
present in STETSOM products. It can be
attached to the car dashboard, facilitating
usability and access to the settings of the
product connected to it.
Before install
Read this manual carefully before using the
product.
▪
Always use cables and harnesses
supplied
with
guarantees the best functioning of the
product and greater security for your
installation.
▪
Distribute the installation cables as far
away from the vehicle's original wiring
as possible, as it can generate unwanted
interference and noise.
In case of doubt, ask the store where the
installation was carried out or contact our
Customer Service: +55 018 2104 9412
Compatibility
Currently, SMC supports:
● Audio Processor STX2436BT
the
product.
This
26
Product presentation
1
2
3
1. SMC INPUT: Plug and play input for
communication with other products.
2. DISPLAY: Allows visualization and
interaction with the system.
3. HOTKEYS: Hotkeys for selecting output
channels.
SHORT TOUCH: Select the channel to
apply the parameters.
LONG TOUCH: Allows you to turn the
selected output channel on or off.
4. HOTKEYS LEDs: Indicates the status for
each processor output channel.
▪ Blue LED on: Output channel is on.
▪ Red LED on: Output channel is off.
▪ LED switching between blue and red: If
the output channel is on and the LED starts
to alternate between colors, it indicates that
the limiter of that channel is working.
5. ENCODER: A rotating controller that
allows interaction with the functions and
system resources.
4
5
27
