Idiomas disponibles
Idiomas disponibles
Audio Input and Output
This function makes it possible to select the
audio source A, B, or A+B (sum) for each output.
The feature can be accessed by the "Audio Input
and Output" menu within the "Audio" settings.
INPUT/EXIT AUDIO
IN A+B ---> OUT1
Turning the ENCODER switches the audio
source for the selected track. To select another
channel, short-touch the HOTKEY of the desired
channel.
Crossover
This function makes it possible to precisely
define the cutoff frequencies of the low pass
filters, high pass filters, attenuation, and filter
topology individually per output. The available
filters and attenuation are:
HPF: Butterworth 12/18/24/36 dB/8ª
Linkwitz-Riley 12/18/24/36 dB/8ª
LPF: Butterworth 12/18/24/36 dB/8ª
Linkwitz-Riley 12/18/24/36 dB/8ª
It's also possible to load crossover presets,
allowing you to quickly configure the frequency
cuts of subwoofers, woofers, drivers, tweeters,
and others.
The feature can be accessed by the "Crossover"
menu within the "Audio" settings.
34
HPF OUT
f:12 Hz LR48
LPF OUT1
f:107 Hz BT12
Each long touch of the ENCODER changes
the edit parameter, filter type, frequency, and
attenuation/topology.
Select the desired output channel for editing
thought long touching the corresponding
HOTKEY.
Crossover Presets
The processor offers 11 Crossover presets,
which are:
▪
SUBW1
▪
SUBW2
▪
▪
WOOFER2
▪
WOOFER3
▪
DRIVER2
▪
DRIVER3
In this way, it is possible to quickly configure the
frequency cutoff of each output.
The feature can be accessed by the main menu,
in "DEFAULT XOVER".
MAIN MENU
Default XOVER
DEFAULT XOVER
OUT 1 <-
Alignment / Delay
This function makes it possible to digitally
align the speakers through the time correction
performed by the DSP, ensuring that the
sound from the speakers reaches the listener
simultaneously, avoiding cancellation between
SUBW3
▪
WOOFER1
▪
DRIVER1
▪
TWEETER
▪
FLAT
FLAT
35
