2. AIR CONDITIONER OPERATIONS AND PERFORMANCE
Use the system in the following temperature for safe and effective operation. The Max operation temperature for the air
conditioner. (Cooling/Heating)
1. For proper performance, operate the unit under the usable operating temperature and humidity conditions
indicated in this owner's manual. If the unit is operated beyond these conditions, it may cause malfunctions of
the unit or dew dripping from the unit.
!
CAUTION
2. The phenomenon is normal that the surface of air conditioning may condense water when the relative larger
humidity in room, please close the door and window.
3. Optimum performance will be achieved within the operating temperature range.
♦
Three-minute protection feature
A protection feature prevents the air conditioner from being activated for approximately 3 minutes when it restarts
immediately after operation.
♦
Power failure
Power failure during operation will stop the unit completely.
● The OPERATION lamp on the indoor unit will start flashing when power is restored.
● To restart operation, push the ON/OFF button on the remote controller.
● Lightning or a car wireless telephone operating nearby may cause the unit to malfunction.
● Disconnect the unit with the power and then connect the unit with the power again. Push the ON/OFF button on the
remote controller to restart operation.
♦ Refrigerant leakage detection (optional):
With this new technology, the dipsplay area will appear EC (if applicable) and the LED indication lamps continue
flashing when the outdoor unit detects refrigerant leakage.
3. HINTS FOR ECONOMICAL OPERATION
The following should be noticed to ensure an economical operation.
- Adjust the air flow direction properly to avoid winding toward your body.
- Adjust the room temperature properly to get a comfortable situation and to avoid supercooling and superheat.
- In cooling, close the curtains to avoid direct sunlight.
- To keep cool or warm air in the room, never open doors or windows more often than necessary.
- Set the timer for the desired operating time.
- Never put obstructions near the air outlet or the air inlet. Or it will cause lower efficiency, even a sudden stop.
- If you don't plan to use the unit for a long time, please dis connect power and remove the batteries from the remote
controller. When the power switch is connected, some energy will be consumed, even if the air conditioner isn't in
operation.
So please disconnect the power to save energy. And please switch the power on 12 hours before you restart the unit to
ensure a smooth operation.
- A clogged air filter will reduce cooling or heating efficiency, please clean it once two weeks.
4. CLEANING AND MAINTENANCE
CAUTION
- Maintenance work can only be performed by specialized maintenance personnel.
- The main power switch must be turned off before doing electrical connections or cleaning of air filter.
- Do not use water or air of temperature above 5°C to clean air filter or face panel.
♦ METHOD FOR CLEANING AIR FILTER
- The air filter can prevent the dust or other particulate from going inside In case of blockage of the filter, the working
efficiency of the air conditioner may greatly decrease. Therefore the filter must be cleaned once two weeks during long
time usage.
- If the air conditioner is positioned in a dust place, the cleaning frequency of the air filter must be increased.
Temperature
Mode
Cooling operation
Heating operating
Dry operation
Outdoor temperatura
Indoor temperatura
-15°C ~ 24°C
17°C ~ 32°C
-15°C ~ 24°C
0°C ~ 50°C
17°C ~ 32°C
46
0°C ~ 30°C