Using The Remote Control; Switching The Unit On And Off; Setting The Operating Mode - MAXA 3500 W Manual Usuario/Instalador

1.4. Using the remote control

The remote control uses two 1.5V, R03 type AAA batteries (provided). To insert the batteries, remove the cover
completely from the remote control by sliding it downwards. Insert the batteries in the relative housing, making sure you
respect the polarities indicated. Replace the cover and select the desired functions. Follow the same steps when
replacing flat batteries with new batteries. On average the batteries last for around one year.
The remote control display is always on. Remove the batteries from the remote control if you expect not to use it for a
long period of time. Point the remote control towards the unit receiver when setting the various functions. If the signals
are received correctly, the unit will emit a "beep". The remote control is able to transmit up to a distance of around 8
metres from the receiver. Do not expose the remote control to excessive damp, direct sunlight or other heat sources,
and do not subject it to knocks. Protect the remote control from water and other liquids. If the unit's infrared receiver is
exposed to direct sunlight or strong artificial light, or if a fluorescent lamp with electronic switch is placed nearby, the unit
could be subject to operating anomalies or may not work at all. The use of other remote controls in the vicinity or in the
same room as the unit could affect its operation. Do not point other remote control transmitters at the unit receiver.
● SWITCHING THE UNIT ON AND OFF
ON/OFF
Press the ON/OFF key to switch the unit on or off.
When switching from ON to OFF the operating mode is interrupted and current time delays are cancelled, while the
appliance and fan operating modes and the set temperature value are memorised. When switching from OFF to ON, the
machine automatically restores all the operating modes memorised before it was switched off.
When the unit is on, the unit on symbol appears on the display
The presence of this symbol on the display indicates that the remote control is transmitting the settings to unit ▲.
● SETTING THE OPERATING MODE
By pressing the Mode key several times it is possible to change the unit operating mode. The selected operating mode
symbol appears on the display.
AUTO: automatic mode.
COOL: cooling mode.
DRY: dehumidification mode.
HEAT: heating mode.
FAN: fan only mode.
When the automatic programme AUTO is selected, the unit may operate in COOLING or HEATING mode depending on
the temperature difference in place between the ambient temperature and the temperature selected on the remote
control. When the cooling programme COOL is selected, the unit operates with a free temperature setting, lowering the
ambient temperature. When the dehumidification programme DRY is selected, the unit operates with a free temperature
setting, progressively lowering the ambient temperature and humidity. When the dehumidification programme DRY is in
operation, the FAN SPEED button cannot be used. When the heating programme HEAT is selected, the unit operates
with a free temperature setting, raising the ambient temperature. When the fan programme FAN is selected, the unit
operates without temperature settings, simply blowing air through the environment.
IMPORTANT!
- The unit fan stops when the set temperature is reached and is then automatically reactivated at minimum speed to
prevent air stratification phenomena in the vicinity of the appliance.
- When the COOL DRY mode is selected, the fan may not start up straight away because the ANTI-HEATING mode
present. When the HEAT mode is selected, the fan may not start up straight away because the ANTI-COOLING mode
present.
● ECONOMY MODE
ECONOMY
This function is not available in the units.
● SETTING THE DESIRED TEMPERATURE
▲and▼ by pressing these keys in the AUTO, COOL, DRY and HEAT modes, it is possible to increase or reduce the
desired temperature between 17°C and 30°C. The display shows the selected temperature.
.
42