Idiomas disponibles
Idiomas disponibles
ENGLISH
Please carefully read the safety
instructions before using the
appliance.
PROFESSIONAL
CORDLESS
TRIMMER
FX7870GBPE – FX7870IBPE –
FX7870RBPE
Adaptor
Vibrations
LpA (dB(A))
OPERATING INSTRUCTIONS
1. Before using the trimmer for the
first time, charge continuously
for 4 hours. Maximum battery
capacity will only be reached
after 4 charging and discharging
cycles.
2. Make sure the switch on the
trimmer is in the «0» position.
3. Apply a drop of the provided
lubricating oil across the blades;
wipe off any excess oil with a dry
cloth.
4. Connect the charging jack into
the receptacle on the bottom of
the trimmer. Plug the adapter
into any electrical outlet (at
the voltage listed on the label
affixed to the adapter). The
charging indicator will blink to
indicate that the charging has
CORD/
OUTLINING
CA78M
< 2,5 m/s²
< 70
begun. Charging is complete
after 4 hours. User will see LED
light has stopped blinking and
is now steady lit.
5. The adapter may become warm
while charging. This is normal.
6. Preserving
To
maintain
capacity of the rechargeable
batteries, the trimmer should
be recharged for 4 hours
approximately every 6 months.
7. Slide the switch to «I» position.
8. Make sure the switch is in the
«0» position when the trimmer
is not operating.
9. Remove hair trimmings and
debris from the blades using
the provided cleaning brush.
Wipe the housing clean with a
dry cloth.
10. Apply
lubricating oil to the blades
and wipe off any excess oil with
a dry cloth. This last procedure
is important for the proper
maintenance of the blades.
11. If the charging light starts
to flash rapidly (more than
4 flashes per second) then
the appliance is faulty. If this
happens then please stop
charging and remove the
adapter from the mains and
contact an authorized Service
Center.
FOR DIRECT PLUG-IN
OPERATION
Make sure trimmer is off. Connect
charging jack into the receptacle
7
the
batteries:
the
optimum
a
few
drops
of
