Idiomas disponibles
Idiomas disponibles
The blu led L2 indicates the output associated with the channel as follows:
Permanently lit = output 1; Flashing = output 2; Off = no output. To change the output press P2.
Factory default setting; CHA output 1; CHB output 2; CHC - CHD no output
Attention! Remove jumper J1 after the procedure. The receiver will not function with the jumper inserted
Receiver code memory module
The codes are stored in a non-volatile EEPROM memory module.
The receiver is designed to manage up to 1000 users (1000 transmitters) with the possibility of memorising
and cancelling each individual user.
For each transmitter it is possible to memorize a maximum of 4 functions: A - B – C – D.
The memorized codes are maintained in this module even in the absence of power for an unlimited period
of time.
Indications on the receivers
Red Led L1 - user management
- Flashing slowly: memorising a single user
- Flashing rapidly: cancelling a single user
- Continuously lit: memory full
Green Led L2 - appliance "STATUS" LED
- Continuously lit: power on
- Flashing: no memory module present (excluding the 1-channel mini receiver)
16
