Technical Data - Hilti SF 100-A Manual De Instrucciones

Technical data

SF100-A battery screwdriver
Voltage:
Weight as per EPTA-Procedure 01/2003:
Dimensions (l×h×w):
Speed (no load):
Chuck / Quick-release chuck capacity:
Torque:
Torque adjustment:
Speed control:
Reversing switch:
Spindle lock:
Motor brake:
Dust-tight enclosure and permanent lubrication (maintenance free)
-NOTE-
The vibration emission level given in this information sheet has been measured in accordance with a standardised
test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assess-
ment of exposure. The declared vibration emission level represents the main applications of the tool. However if
the tool is used for different applications, with different accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level over the total working period. An estimation of the
level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working peri-
od. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organisation of work patterns.
Noise and vibration information (according to EN 60745):
Noise level (power):
For the given sound power level as per EN 60745, the tolerance is 3 dB.
Wear ear protection!
Triaxial vibration value (vibration vector sum)
measured in accordance with EN 60745-2-1 prAA: 2005
Drilling in metal, (a )
h, D
measured in accordance with EN 60745-2-2 prAB: 2006
Screwdriving without impact, (a
Uncertainty (K) for triaxial vibration value :
Battery
Voltage:
Capacity:
Weight:
Temperature monitoring:
Type of cell:
No. of cells:
Right of technical modifications reserved
10
Printed: 07.07.2013 | Doc-Nr: PUB / 5070585 / 000 / 00
):
h
9.6 Volt
1.6 kg
225×223×61 mm
1st speed: 0–350 r.p.m.
2nd speed: 0–1250 r.p.m.
0.8–10 mm
max. 16 Nm (set at drilling symbol)
1–7 Nm (at 20 settings)
electronic via on-off switch
electronic with switching lock when running
when the screwdriver is switched off
activated by the control switch
76 dB (A)
< 2.5 m/s 2
< 2.5 m/s 2
1.5 m/s 2
SBP10
9.6 Volt
9.6 Volt×2.0 Ah = 19.2 Wh 9.6 Volt×3.0 Ah = 28.8 Wh
0.55 kg
yes
nickel-cadmium
Sub C design
8
SFB105
9.6 Volt
0.60 kg
yes
nickel-metal hydrid
Sub C design
8