8/12/22, 1:28 PM
3D Connect envía los siguientes datos a los servidores de 3D Systems desde su impresora:
Dispositivo
Condiciones
Compilación
Controlador
Filtro de escape
Proyector
Existencias
Motor Z
es.infocenter.3dsystems.com/nextdent5100/print/book/export/html/526
Guía del usuario
build.job_data*
chamber_door.state
lifetime_build_hours
lifetime_on_hours
printer_name
printer_state
serial_number
fault.controller.internal_temperature
fault.controller.internal_temperature_override
fault.sata.drive.failure
build.abort_code
build.current_layer
build.progress
build.time_remaining
controller.internal_temperature
controller.ip_address
controller.mac_address
controller.secure_device_read_failure_count
controller.serial_number
controller.version
controller.version_date
exhaust_ lter.carbon_ lter_element_hours
projector.led_power_commanded
projector.led_pwm_value
projector.led_total_hours
projector.manual.compensation
projector.power_cal_table
projector.serial_number
projector.total_hours
stock.barcode
stock.batch_expiration_date
stock.batch_number
stock.bottle_size
stock.bottle_sku
stock.bottle_udi
stock.label_current_used_amount
stock.label_last_used_date
stock.label_uuid
stock.material_code
stock.material_density
stock.material_exposure
stock.material_name
stock.material_shade
z_motor.position
30/132
