Skymsen CR-8L Manual De Instrucciones página 7

Ocultar thumbs Ver también para CR-8L:
Idiomas disponibles

Idiomas disponibles

Read the INSTRUCTONS in the manual before turning
on the equipment. Make sure that the information as
understood. If you have any questions, check the Skymsen.
4.2 Precautions and Observations before Turning
on the Equipment
4.2.1 Danger
An electric cable or electric wire with damaged jacket or bad
insulation could cause electrical chocks as well as electrical
leak. Before using the equipment, check conditions of all
wires and cables.
4.2.2 Advices
Be sure ALL INSTRUCTIONS in this manual have been
thoroughly understood.
Every function and operational procedure have to be very
clear to the operator. Contact your nearest Dealer for
further questions.
Any manual command (switch, button or lever) shall be
given only after being sure it is the correct one.
4.3 Routine Inspection
4.3.1 Cautions
Check the motor and the sliding and spinning parts of the
appliance, in case of abnormal noise.
Check the protections and devices so that they always work
properly.
4.4 Operation
4.4.1 Advices
Do not work with long hair that may touch any part of the
appliance, because they may cause serious accidents. Tie
them up and to the back, cover it with a scarf.
5. Analysis and Problems Solving
5.1 Problem, causes and solutions
This appliance was designed to operate with the need of minimum maintenance but the natural wearing caused by longer
use of the equipment may occasionally cause some malfunctions.
If any problem occurs with your equipment, the most common situations are listed below with recommended solutions.
- Only trained and qualified users can operate the appliance.
- NEVER operate the appliance without any safety equip-
ment.
4.5 After finishing work
4.5.1 Precautions
Always wash the appliance after using it.
To do that, only start cleaning it when it has come to a
complete stop.
Put all components back to their functional positions before
turning it on again.
4.6 Maintenance
4.6.1 Dangers
Any maintenance with the machine in working situation is
dangerous.
SWITCH OFF THE APPLIANCE BY PULLING THE PLUG OFF
THE SOCKET DURING MAINTENANCE.
Always disconect the plug from the outlet in case of
emergency.
4.7 Advices
Electrical or mechanical maintenance must be done by qua-
lified personal for such operation.
The person in charge has to be sure that the machine is un-
der TOTAL SAFETY conditions when working.
7
loading

Este manual también es adecuado para:

Cr-8lr