Citizen CT-S4000 Manual De Usuario página 28

5.3 Manual Setting of Memory Switch
Memory switches can be set manually or by a command.
For manual setting, refer to the next page.
The function of each memory switch is shown in the following table.
(The white-on-black characters
Switch No.
Memory SW1-1
SW1-2
SW1-3
SW1-4
SW1-5
SW1-6
SW1-7
SW1-8
Memory SW2-1
SW2-2
SW2-3
SW2-4
SW2-5
SW2-6
SW2-7
SW2-8
Memory SW3-1
SW3-2
SW3-3
SW3-4
SW3-5
SW3-6
SW3-7
SW3-8
Memory SW4-1 *M
SW4-2 *M
SW4-3
SW4-4 *L
SW4-5 *L
SW4-4 *M
SW4-5 *M
SW4-6
SW4-7
SW4-8 *3
Notes:
*1: The factory setting of "Paper Select" will be different, depending on the model classfication.
*2: In the case of selecting the thermal roll with the SW4-4, the SW4-5 will not be available. The
SW4-5 will be set to "Black Mark" status for the Black Mark version printer.
*3: In the label mode (with memory switches SW4-4 and SW4-5 set to ON), full cutting is used for
paper regardless of the setting of memory switch SW4-8.
*4: When printing on label paper, printing columns of 660 dots is not usable.
Memory switch SW2-8 is not usable with label paper.
are factory setting.)
Setting
Power ON Info
Buffer Size
Busy Condition
Receive Error
CR mode
Reserved
DSR Signal
Init Signal
Reserved
Auto Cutter
Spool Print
Full Col Print
Resume aft PE
Reserved
Reserved
PNE Sensor
Resum Cttr Err
Reserved
Parallel 31 Pin
Reserved
Reserved
Reserved
CBM1000 Mode
Resum Open Err
P. Length Set
Power on TOF
Feed&Cut at TOF
Paper Select *1
Position detect *2
Paper Select *1
Position detect *2
Reserved
Reserved
Prtial Only
0 (OFF)
Valid
4k bytes
Full/Err
Print "?"
Ignored
Fixed
Invalid
Invalid
−
Invalid
Invalid
LineFeed
Next
Fixed
Fixed
Valid
Valid
Fixed
Valid
Fixed
Fixed
Fixed
Invalid
Close
Auto Measure
Invalid
Invalid
Thermal Roll
Black Mark
Thermal Roll
Black Mark
Fixed
Fixed
Invalid
— 25 —
1 (ON)
Not send
45 bytes
Full
No Print
LF
−
Valid
Valid
Fixed
Valid
Valid
WaitData
Top
−
−
Invalid
Invalid
−
Invalid
−
−
−
Valid
Command
Command
Valid
Valid
BM.P / Lbl.P *4
Label
BM.P
−
−
−
Valid