Idiomas disponibles
Idiomas disponibles
EN
9.- SYSTEM: lock the front panel of the matrix (a), enable/disable sounds (b), set the display turn on time
(c), modify the Baud rate value for RS-232 connection (d), update the firmware (e), reset the matrix to
factory defaults (f) and reset the matrix remotely (g).
a
b
c
RS-232 COMMUNICATION
To set up the device using the RS-232 port, connect the cable directly to your PC (DB9 connector to RS-232
port or USB connector) and to the matrix (DB9 connector to RS-232 port).
Use a suitable program for RS-232 protocol communication and perform the following configuration:
Select the COM port used on your PC for this communication
-
Baud rate: 115200
-
Data bits: 8
-
Parity: none
-
Stop bits: 1
Scan the following QR code or visit our website www.fonestar.com/en/FO-22MX88 to download the RS-232
command list.
It is possible to modify the Baud rate value for RS-232 communication:
-
Via TCP/IP communication. For more information see the REMOTE CONTROL section.
-
Via RS-232 communication. Using the appropriate command, download listing from the web.
-
From the front button set on the matrix. Next, we explain the steps to follow.
1.- Press the MENU button twice and the display will show SELECT BAUD >115200.
2.- This second line shows the configured Baud rate value. Press the UP/DOWN buttons to change
the value.
The EDID values of the matrix are as follows: 115200 (default), 57600, 38400, 19200, 9600, and 4800.
a
RJ-45
PDA-1408
- 8 -
b
d
e
f
g
PC
RJ-45
PDA-1408
