Idiomas disponibles
Idiomas disponibles
5.- OUTPUT: allows you to visualise outputs status (a), give them a name (b), and configure the SCALER
MODE (c), ARC (d), and STREAM (e) on each of them.
SCALER MODE: modifying the resolution of the output image: BYPASS makes no changes to the
image, 4K>1080p changes the resolution from 4K to 1080p and AUTO scales the image automatically
by analysing the connected device in the output.
Arc (AUDIO RETURN CHANNEL): allows to send audio through the HDMI cable to and from the TV to an
audio device without making an additional connection. It is important to note that the HDMI cable must
support ARC and must be manually activated on all devices involved in this connection.
6.- STREAM: allows you to completely cut out the A/V signal output via the HDMI connection. The audio
L/R and COAX outputs will continue to play the audio signal.
d e
7.- CEC: enables control of sources and receivers using the CEC protocol. It is important to note that the
HDMI cable and the device to be controlled must support CEC.
8.- NETWORK: allows you to modify network settings (a), configure GUI access options (b) rename the
matrix (c), and reset the computer's default network settings (d).
NOTE: when making a change, you will need to press the SAVE button (e) to load the new configuration
into the matrix. Note that if you change the network or access settings, the system will require you to
reconnect to the matrix using this new setting..
a
b
c
e
a
b
a
b
c
a
b
c
a
b
a
d
a
b
c
d e
d
- 7 -
a
b
c
c
d e
d
e
d e
c
d e
a
b
c
b
e
d
a
b
c
e
EN
e
f
g
a
