Idiomas disponibles
Idiomas disponibles
EN
This configuration is possible from the front panel of the matrix.
1.- Press the MENU button once and the display will show SELECT EDID.
2.- Modify the EDID value by pressing the UP or DOWN buttons and press the ENTER button.
3.- Select the input to be configured by pressing the UP or DOWN buttons. It is possible to select a
single or all inputs (INPUT ALL) and press the ENTER button to save the setting. The display will
show EDIT UPDATE SUCCESS to confirm the setting.
The EDID values of the matrix are as follows:
EDID
1080P 2.0 CH
1080p, stereo audio 2.0
1080P 5.1 CH
1080p, Dolby/DTS 5.1
1080P 7.1 CH
1080p, HD 7.1 audio
1080I 2.0 CH
1080i, stereo audio 2.0
1080I 5.1 CH
1080i, Dolby/DTS 5.1
1080I 7.1 CH
1080i, HD 7.1 audio
3D 2.0 CH
3D, stereo audio 2.0
3D 5.1 CH
3D, Dolby/DTS 5.1
3D 7.1 CH
3D, HD 7.1 audio
4K*2K@30 2.0 CH
4K@30Hz (4:4:4), stereo audio 2.0
4K*2K@30 5.1 CH
4K@30Hz (4:4:4), Dolby/DTS 5.1
4K*2K@30 7.1 CH
4K@30Hz (4:4:4), HD audio 7.1
4K@60 420 2.0 CH
4K@60Hz (4:2:0), stereo audio 2.0
4K@60 420 5.1 CH
4K@60Hz (4:2:0), Dolby/DTS 5.1
4K@60 420 7.1 CH
4K@60Hz (4:2:0), HD audio 7.1
4K*2K@60 2.0 CH
4K@60Hz (4:4:4:4), stereo audio 2.0
FRONT PANEL LOCK
The matrix allows the front panel to be locked to prevent accidental manipulation. To do this, press the
LOCK button on the front panel to lock and the display will show the following message PANEL LOCK!
(PANEL LOCKED). Press the LOCK button again to unlock and the display will show the following message
PANEL UNLOCK! (PANEL UNLOCKED).
CONNECTION
-
Make connections with all devices turned off.
IMPORTANT: it is recommended to use quality HDMI cables, of the strictly necessary length and avoiding
large lengths so that there is no noticeable loss in the signal.
-
Connect the HDMI signal sources to the INPUT 1-8 inputs on the matrix.
-
Then connect the OUTPUT 1-8 outputs to the monitors, TVs and/or projectors using HDMI cable. And
connect external audio devices if necessary.
-
Connect the power to the device and turn on the device. First the sources, then the matrix and finally the
devices connected to the outputs.
-
Perform basic configuration settings from the button set on the front of the device and/or using the
remote control (source selection for each output, EDID function). For full matrix configuration it is
recommended to use remote control via TCP/IP - GUI communication. For more information see the
REMOTE CONTROL section.
DESCRIPTION
EDID
4K*2K@60 2.0 CH
4K@60Hz (4:4:4), Dolby/DTS 5.1
4K*2K@60 5.1 CH
4K@60Hz (4:4:4), HD audio 7.1
4K@60 HDR 2.0 CH
4K@60Hz (4:4:4), stereo audio 2.0 HDR
4K@60 HDR 5.1 CH
4K@60Hz (4:4:4), Dolby/DTS 5.1 HDR
4K@60 HDR 7.1 CH
4K@60Hz (4:4:4), HD audio 7.1 HDR
User define 1
User 1 (configurable via TCP/IP - GUI)
User define 2
User 2 (configurable via TCP/IP - GUI)
Copy HDMI Out 1
Output copy 1
Copy HDMI Out 2
Output copy 2
Copy HDMI Out 3
Output copy 3
Copy HDMI Out 4
Output copy 4
Copy HDMI Out 5
Output copy 5
Copy HDMI Out 6
Output copy 6
Copy HDMI Out 7
Output copy 7
Copy HDMI Out 8
Output copy 8
- 4 -
DESCRIPTION
