Idiomas disponibles
Idiomas disponibles
4. INTENDED USE
The machine is intended for cutting and trimming hedg-
es and bushes in domestic use.
5. OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.
WARNING! DO NOT USE THE PRODUCT
WITHOUT ATTACHING THE GUARD AND
FRONT HANDLE.
ASSEMBLY & OPERATION
ACTION
ASSEMBLY
Installing and Removing the battery
pack
Charging the battery pack
Your battery pack is UNCHARGED, you
must charge before use.
More details can be found in charger's
manual
OPERATION
Starting and stopping
Top cutting
WARNING: If any parts are
missing, damaged or broken, do
not operate your hedge trimmer until all
damaged parts have been replaced or
repaired. Failure to do so could result in
serious personal injury. DO NOT USE
WITHOUT FRONT HANDLE AND SAFETY
GUARD.
Side cutting
Lubricating the Cutting Blade
Note: It is important to use only the
recommended standard lubricating oil
(WD-40) to avoid damage to the blade.
20V 22" Brushless Hedge Trimmer
HOW TO USE YOUR HEDGE
TRIMMER
Note that the front switch lever can be activated
on three sides, giving you many choices for a
comfortable grip. Before cutting an area, inspect
it first and remove any foreign objects that could
become thrown or entangled in the blades. Always
hold the trimmer with both hands and with the blade
away from you before turning it on.
When trimming new growth, use a wide sweeping
action so that the stems are fed directly into the
blade. (See Fig. C& D)
Allow the cutting blades to reach full speed before
cutting. When operating, keep the cutting blades
away from people and objects such as walls, large
stones, trees, vehicles, etc.
If the blade stalls, immediately stop the trimmer.
FIGURE
Release the two Switch components (5 & 6) before
attempting to clear jammed debris from the cutting
blades.
Wear gloves when trimming thorny or prickly growth.
See Fig. A
Do not attempt to cut stems that are too thick for the
cutting blade.
TOP CUTTING
Use a wide sweeping motion (See Fig. C). A slight
downward tilt of the cutting blades in the direction of
motion gives the best cutting results.
SIDE CUTTING
See Fig. B1,
When trimming the sides of the hedge, begin at the
B2
bottom and cut upwards (See Fig. D), tapering the
hedge inward at the top. This shape will expose more
of the hedge, resulting in a more uniformed growth.
6. MAINTENANCE
See Fig. C
Remove battery before carrying out any adjustment,
servicing or maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
See Fig. D
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust.
See Fig. E
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0 ℃-45 ℃
(32 ℉-113 ℉).
The recommended ambient temperature range for
the charging system during charging is 0 ℃ -40 ℃
(32 ℉ -104 ℉ ).
EN
9
