Indesit DFO 3T133 A F X Guía Rápida página 2

Ocultar thumbs Ver también para DFO 3T133 A F X:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 7
EN
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: [email protected]
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and
pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-
bration. The sensor calibration can increase program duration up to 20 min.
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected
program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled.
MULTIZONE - If there are not many dishes to be washed, a half loading
may be used in order to save water, electricity and detergent. By de-
fault the appliance washes dishes in all racks.
TABLET (Tab) - If you use powder or liquid detergent, this option
should be off.
WATER TAP CLOSED – Alarm
Flashes when there is no inlet water or water tap is closed.
PUSH&GO - button is an easily distinguishable button that allows you
direct access to the Push&GO program, a wash and dry cycle that
ensures great cleaning performance in a short time. You don't have to worry
which program to choose, Push&GO cycle will do the work for you.
To select Push&GO program, switch on appliance, press only Push&GO
button for 3 seconds.
-
DELAY
The start of the program may be delayed for a period of time
between 0:30 and 24 hours
The DELAY function cannot be set once a wash cycle has been started.
DRAIN OUT - To stop and cancel the active cycle, the Drain Out func-
tion can be used. A long press of START/PAUSE button, will activate
the DRAIN OUT function. The active program will be stopped and the water
in the dishwasher will be drained out.
Auto Door is a convection drying system which automatically opens
the door during/after drying phase to ensure exceptional drying
performance every day. Door opens at the temperature that is safe to
your kitchen furniture.
As additional steam protection, special designed protection foil is added
together with the dishwasher (depending on the model type - can be
the need to buy it). To see how to mount protection foil please refer to
(INSTALLATION GUIDE).
LOADING THE RACKS
CUTLERY RACK
(loading example for the
cutlery rack)
The third rack was desi-
gned to house the cutlery.
CLEANING AND MAINTENANCE
CLEANING THE FILTER ASSEMBLY
A
In case you find foreign objects (such as broken glass, porcelain, bones, fruit seeds
etc.) please remove them carefully.
NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).
2
UPPER RACK
FLAPS WITH
ADJUSTABLE
(loading example for the
upper rack)
Load delicate and light
dishes: glasses, cups, sa-
ucers, low salad bowls.
B
A
C
Please scan the QR code on your product in order to have more detailed information.
EXTRA - makes it possible to carry out a heavy-duty wash cycle of
large crockery up to a max height of 53cm. baking pans, oven grids,
dripping pans, hob grids, large saucepans, serving dishes, pizza dishes,
stainless-steel hood filters. Remove the upper rack to load bulky crockery.
FOLDABLE
POSITION
For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should
ideally be placed at the sides to avoid interferences with the spray arm.
The lower rack has tip-up supports which can be used in a vertical position
when arranging plates or in a horizontal position (lower) to load pans and
salad bowls easily.
More information in the Daily Reference Guide on the website.
CLEANING THE SPRAY ARMS
To remove the upper spray arm,
turn the plastic locking ring in a
clockwise direction.
Release the two locks (right and left) and pull
out the rack.
When the upper rack is fitted, the locks must be
always closed.
In order for the water to reach the crockery
everywhere, arrange it as shown in the Figure.
Do not start the dishwasher without the upper
rack using wash cycles other than EXTRA.
To carry out the wash cycle Extra pour the
detergent DIRECTLY INTO THE TUB and not into
the dispenser.
CAPACITY: 14 standard place-settings
LOWER RACK
(loading example for the lower rack)
The lower spray arm may
be removed by pulling it
upwards.
Quick Guide
loading