Part no
8940166747
Issue no
0
Series no
1
Date
2010-01
Page
6
Position of the gear shift ring - clockwise gear po-
sition
a: Green arrows
d: Gear shift ring
Position of the gear shift ring - counter-clockwise
gear position
d: Gear shift ring
Position of the gear shift ring - middle gear position
c: No arrows visible
d: Gear shift ring
Instructions for reversing
As there is no automatic return of the gear shift to a fixed position,
always check before starting that gear shift is in clockwise position
or counter-clockwise position with all arrows clearly visible.
b: Red arrows
EN
Never shift the gear when the machine is running.
Never start the machine when gear shift is in middle
position.
Grip the gear shift ring by hand and move it forward – right –
forward, see Fig. below.
3: Push forwards
The red arrows indicate the direction of running. I.e. the machine
will run counter–clockwise when started.
When changing back to the clockwise position, pull the ring
back – left – back, see Fig. below.
1: Move backwards
The green arrows indicate the direction of running, i.e. the machine
will run clockwise when started. It is not necessary to keep the
ring in both positions by hand.
Extended reaction arm with spring loaded tube
positioning
Adjust center-to-center distance between socket and spring loaded
tube according nuts to tighten/untighten.
Check that the spring loaded tube is firmly fitted along the reac-
tion arm.
Apply the reaction bar in the wanted position before starting
the machine.
Reaction arm must absolutely turn around hub.
Maintenance
For maximum performance
It is important to lubricate regularly to get maximum performance
and trouble-free operation. The motor should be lubricated with
oil; i.e. drops of oil can be dropped either into the compressed air
or directly into the air inlet.
The trigger, planetary gears, needle bearings and ball bearings
should be lubricated with grease during the regular overhaul of
the machine.
WARNING
2: Turn to the right
1: Push forwards
2: Turn to the left
3: Move backwards
