Changing Parts - Cleaning - Luxia POLY 1000 Manual De Uso Y Mantenimiento

WARNING: The use of scourers or common steel brushes to clean stainless steel is
to be absolutely avoided as iron particles can be left behind, oxidize and
produce rust. Also the use of acid or any corrosive product is to be avoided.
Please check carefully the label on the bottle.
WARNING: Do not wash the machine with direct or high pressure water jets: if water
gets reaching the electrical connections could jeopardize the correct working of the
machine and of its safety systems.
REPLACING CHANGING MACHINE PARTS
Changing machine parts, if necessary, must be
carried out only by authorized personnel, and in
any case you should refer to your dealer.
CLEANING AND DAILY CHECKS
At the end of the working day, the machine must
be cleaned according to the following procedure:
1) Switch off the main switch (1).
2) Remove the overflow pipe (a) and make sure
that all the water in the machine is drained
away.
3) Clean the filter (b) and remove any residue
from the bottom of the tank removing the cover
(c).
Operating and service manual

27 - CHANGING PARTS - CLEANING

Models POLY1000 and POLY1500:
c
b
Model POLY2000:
c
b
POLY 1000/1500/2000
English
a
1
a
1
pag. 47 di 132