Idiomas disponibles
Idiomas disponibles
1. Angle transmission - Having two gears to change the
angle of rotating axis.
2. Shaft tube - Part of the unit that provides a casing for
power transmission shaft.
3. Safety decal - Part number 890617-43130
4. Front handle - Handle located towards the cutting
device.
5. Ignition switch - Device for connecting and
disconnecting the ignition system and thus allowing the
engine to be started or stopped.
6. Throttle latch - Device for temporality setting the throttle
in a partially open position to aid starting.
7. Throttle trigger - Activated by the operator's finger for
controlling the engine speed.
8. Rear handle - Handle located towards the knapsack
power unit.
9. Flexible shaft assembly - Flexible tube for the power
transmission shaft.
10. Throttle cable
11. Safety decal - Part number X505-002310
Description
12. Air cleaner cover - Covers air filter.
13. Spark plug
14. Fuel tank - Contains fuel.
15. Fuel tank cap - For closing the fuel tank.
16. Sylinder cover
17. Shoulder harness - Used to support unit on operator's
back.
18. Silencer cover - Cover the silencer not to make operator
touch to hot surface of silencer.
19. Operator's Manual - Included with unit.
Read before operation and keep for future reference to
learn proper, safe operating techniques.
20. Tools - 17 x 19 mm socket wrench, screwdriver, span-
ner, 6 mm hexagonal wrench and bar tool.
21. Goggles
22. Shield - Device to protect the operator from accidental
contact with the cutting head and thrown objects.
Shield support and four bolts.Guard plate - For nylon
line head.
Device to protect the operator from accidental contact
with the cutting head and thrown objects.
Cut off knife; Cut nylon line to adjust line length to proper
swath.
15
