Function Buttons - Honeywell CO25AE Manual Del Usuario

USE & OPERATION

Function Buttons

POWER
Press the POWER button to turn the unit on. The cooler will
start automatically at medium speed. After a few seconds the
speed will switch to low. To turn the unit off, press the button
POWER
again.
SPEED
Press the SPEED button repeatedly and the speed will
change. The indicator light will show the selected speed. High
(Hi), Medium(Med), Low(Lo) & Natural. In Natural mode the unit
operates in a random cycle of a combination of OFF, LOW,
MEDIUM and HIGH to simulate a natural air breeze.
MODE
Press the MODE button to switch the air cooler between
FAN and COOL modes.
COOL Mode: To begin cooling the desired area, press the
MODE button. The indicator light on COOL will come on and
the water pump will operate. You will feel the cooler air after
the honeycomb media is completely wet.
FAN Mode: To switch on the FAN only mode, press the MODE
button again and the indicator light on FAN will come on.
TIMER
Press the TIMER button until the indicator light comes on to
your desired time. Once the set time has passed, the unit will
automatically shut off. The Timer function allows you to
program the unit for up to 7.5 hours of use.
10