VITO PRO-POWER VIBCRBSFL20A Manual De Instrucciones página 32

Idiomas disponibles

FREQUENTLY ASKED QUESTIONS/ TROUBLESHOOTING

Question/Problem - Cause

Cause

The angle grinder does not start when you press the

ON/OFF switch:

• The battery is discharged;

• ON/OFF contacts are not in good condition or it

does not work;

The motor makes an abnormal sound, starts

intermittently or runs slowly:

• ON/OFF switch contacts are damaged;

• Mechanical parts are blocked/clogged;

• The angle grinder is running over excessive

pressure, overloaded motor;

The accessories vibrate excessively during operation:

• The outer flange is not tightened correctly;

Angle grinder overheats:

• Overloaded appliance;

• Poor assembly of the housing or pieces inside the

angle grinder;

Solution

• Charge it;

• Repair or replace the switch;

• Inspect the mechanical parts;

• Reduce the pressure applied;

• Tighten;

• Reduce the pressure applied;

• Check if there is any blockage or part touching the

spindle;